Sealy Ease - Connecting Strap (Optional); Step 1: Position Bases and Loosen Legs; Step 2: Attach Connecting Strap; Step 3: Re-tighten Legs

12
With the bases in their
desired location, slightly
loosen both legs to allow
the strap to fit on the leg
bolt, between the leg
washer and frame.
Slide side (a) of the Connecting Strap onto leg bolt. Swing the strap and
connect side (b) to the leg bolt. Secure the strap by shifting to the left.
Re-tighten legs. Do not over tighten. Use the remaining strap and repeat
on other end of the base.
STEP 2
STEP 1
STEP 3
connecting strap (optional)
a
b
If any split setup is being installed, plastic Connecting Straps are provided (one per base)
to secure the bases together.