7
installation guide
STEP 7
STEP 8
STEP 9
STEP 10
Carefully flip the base over on to its legs. Important: Two people are
required to move the bed base. Do not drag across the floor. Do not rest
frame on its side, excessive pressure may damage the legs.
Plug the Power Cord into a power source.
A surge protector is recommended.
Ensure that batteries are correctly installed. Quickly test remote
functions to verify proper setup before placing mattress on base. Return
the base to a FLAT position before placing the mattress on top.
Setup is now complete!
Test all functions on remote.
Slide the left side of the Mattress Retainer Bar into the bracket.
Pull the retainer bar to the opposite bracket and secure the right
side.
For customer support, call Customer Service: U.S. 1-800-499-1965 | Canada 1-800-268-4414
To Next Page
Loading...
