Sears C 151 61822 4 User Manual

1
Compact 2 Stage Snowblower 40"
with Electric Lift
for
CRAFTSMAN TRACTORS
WARNING:
READ & FOLLOW ALL SAFETY RULES & INSTRUCTIONS BEFORE
OPERATING YOUR EQUIPMENT
107297_EN
*107297*
* ASSEMBLY
* OPERATION
* MAINTENANCE
* REPAIR PARTS
OWNER’S MANUAL
Model Number
C 151 61822 4
Sears Canada Inc.
Toronto, Ontario
M5B 2B8
R-07152015

Sears C 151 61822 4 Specifications

General

Model Number	C 151 61822 4
Category	Snow Blower
Engine Displacement	208cc
Drive System	Auger-Propelled
Chute Control	Manual
Starter Type	Recoil
Wheel Size	8 inch
Engine Type	Gasoline

Summary

Limited Warranty

One Year Limited Warranty on Craftsman Tractor Attachments

Specifies the duration and conditions of the manufacturer's warranty.

Introduction

To the Purchaser

Welcomes the user and explains the manual's role in safe operation and servicing.

Safety Precautions

Preparation

Details pre-operation checks and safety measures before using the snowblower.

Operation Safety

Outlines essential safety rules and warnings for operating the snowblower attachment.

Maintenance and Storage Safety

Safety guidelines for maintaining and storing the snowblower.

Transport Safety

Safety instructions to follow when transporting the snowblower attachment.

Safety Decals

Decal Identification and Replacement

Shows safety decals and instructs on replacement when damaged.

Assembly

Installing Reflectors

Instructions for installing safety reflectors on the tractor.

Step 1: Subframe Installation

Detailed steps for installing the subframe assembly.

Step 2: Subframe Preparation

Procedures for preparing the subframe, including winch and pulley installation.

Step 3: Winch Control Switch Installation

Guide for installing the winch control switch and relay.

Connecting Wires

Instructions for connecting the winch wiring harness to the relay.

Connecting Wires to Battery

Steps for connecting the relay wires to the tractor's battery terminals.

Step 4: Drive Mechanism Installation

Detailed steps for installing the drive mechanism and related components.

Belt and Pulley Alignment Verification

Ensures proper alignment of the drive belt and pulleys for correct operation.

Step 5: Snowblower Preparation

Steps for preparing the snowblower unit before attaching it.

Step 6: Snowblower Installation

Final steps for attaching the snowblower to the tractor.

Skid Shoe Adjustment Verification

Procedures for adjusting skid shoes for proper ground clearance.

Tire Pressure Verification

Ensures proper tire inflation for optimal performance and safety.

Operation

Snowblower Operation

Explains the correct methods for running the snowblower attachment.

Clearing a Clogged Discharge Chute

Provides step-by-step instructions for safely clearing chute blockages.

Controls

Describes the function and operation of the snowblower's control mechanisms.

Snow Removal

Offers guidance on efficient snow removal techniques with the snowblower.

Tire Pressure Verification

Ensures proper tire inflation for optimal performance and safety.

Maintenance

Adjustments

Details necessary adjustments for optimal performance and safety.

Lubrication

Specifies points and frequency for lubricating moving parts.

Cutting Edge Maintenance

Instructions for inspecting and maintaining the snowblower's cutting edge.

General Maintenance

Covers routine checks and upkeep for the snowblower's overall condition.

Shear Bolt and Shear Pin Replacement

Procedures for replacing shear bolts and pins to prevent damage.

Winch Cable Maintenance

Recommendations for maintaining the winch cable to ensure reliability.

Belt Installation, Adjustment, and Replacement

Step-by-step guide for installing, adjusting, and replacing drive belts.

Dismounting & Storage

Snowblower Dismounting

Procedures for safely detaching the snowblower from the tractor.

Drive Mechanism Dismounting

Steps to safely remove the drive mechanism components.

Storage

Guidance on proper storage practices for the snowblower.

Troubleshooting

Auger and Fan Issues

Addresses problems with the auger and fan not turning or functioning correctly.

Belt Problems

Guides on identifying and fixing issues related to belt snapping, shredding, or wear.

Drive Belt Power Issues

Troubleshooting low power or issues with the drive belt's length.

Chute Plugging

Solutions for frequent chute clogging during snow removal.

Chute Rotation Issues

Addresses difficulties with rotating the snowblower chute.

Snowblower Digging Issues

Tips for preventing the snowblower from digging into the ground.

Uneven Snowblower Raising

Resolves issues where the snowblower does not raise evenly.

Snowblower Vibration and Noise

Diagnoses causes for abnormal vibration and noise from the snowblower.

Winch Operation Issues

Troubleshooting problems with the winch running backward or getting stuck.

Winch Power and Speed Issues

Addresses insufficient power or slow line speed issues with the winch.

Winch Cable and Drum Wear

Guidance on preventing premature wear of the winch cable and drum.

Winch Holding Capacity

Troubleshooting winch's inability to hold the accessory in the raised position.

Shackle and Pulley Lift Issues

Resolves problems related to the shackle or pulley lift mechanism.

Electrical System Diagnosis

Provides methods for diagnosing electrical issues using a voltage tester.

Parts Breakdown

Chute with Rotation System

Diagram and parts list for the snowblower's chute and rotation mechanism.

Snowblower

Diagram and parts list for the main snowblower assembly.

Winch 106125

Diagram and parts list for the winch assembly.

Compact Drive Mechanism

Diagram and parts list for the compact drive mechanism.

Subframe

Diagram and parts list for the snowblower subframe.

Torque Specification Table

General Torque Specifications

Standard torque values applicable when specific values are not provided.

Metric Bolt Torque Specifications

Torque specifications for metric bolts used in the equipment.

Options & Attachments

Available Attachments and Accessories

Details on optional items like brooms, blades, cabs, and chains.