Sears SPACEMAKER 1000LS - How to Fold and Move Thetreadmill

HOW TO FOLD AND MOVE THETREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill for storage, unplug the power
cord. Caution: You must be able to safely lift 45 pounds
(20 kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill firmly, with your hands in the locations
shown at the right. To decrease the possibility of in-
Jury, bend your legs and keep your back streighL
Raise the treadmill to a vertical position. Make sure to lift
with your legs rather than your back.
2,
Pivot the treadmill until the locking pin snaps into the
storage latch. Note: It may be necessary to liftthe stop
age latch. Make sure that the locking pin Is Inside the
storage latch, and that the storage latch is fully
closed.
To protect the floor or carpet from damage, place s
mat under the treadmill. Keep the treadmill out of di-
rect sunlighL Do not leave the treadmill In the stop
age position in temperatures above 85" Fahrenheit.
Pin
10
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stop
age position as described above.
1. Hold one console bracket with each hand. Place one foot
on the base as shown.
2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired loca-
tion. To reduce the risk of Injury, use extreme caution
while moving the treadmill. Do not attempt to move
the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the tread-
mill untilit is resting in the storage position.
Console
Base
Wheels