Seastar Solutions Autopilot Pump - Step 3: Filling & Purging the System

Autopilot Pump
9
1.4 Plumbing the SeaStar Autopilot Pump
Hose connection is as follows.
• Helm to AP = S (helm) to H1 (AP), P (helm) to H2 (AP), lower R port
(helm) to R (AP).
• AP to cylinder = C2 (AP) to starboard side (cylinder), C1 (AP) to port
side (cylinder).
H1 H2
C1 C2
H1 H2
C1 C2
Outboard Front Mount
Cylinders:
HC5345-3, HC5347-3
HC5348-3, HC5358-3
I/O Cylinder:
HC5332-2
R
H1
H2
C1 C2
R
H1
H2
C1 C2
PORTSTARBOARD
Figure 4.
All SeaStar hose connections
must be torqued to 15 ft-lbs.
CAUTION
AUTOPILOT PUMP