Seastar Solutions Autopilot Pump - Page 14

10
SEASTAR Hydraulics
Hose connection is as follows.
•
Helm to AP = S (helm) to H1 (AP), P (helm) to H2 (AP), lower R port
(helm) to R (AP).
• AP to cylinder = C1 (AP) to starboard side (cylinder). C2 (AP) to port
side (cylinder).
H1 H2
C1 C2
Side Mount Cylinder:
HC5370
Splashwell Cylinder:
HC5380
R
H1
H2
C1 C2
PORTSTARBOARD
R
H1
H2
C1 C2
Figure 5.
All SeaStar hose connections
must be torqued to 15 ft-lbs.
CAUTION
AUTOPILOT PUMP