Seastar Solutions Autopilot Pump - Page 15

Autopilot Pump
11
Hose connection is as follows.
• Helm pump to AP = S (helm) to H1 (AP), P (helm) to H2 (AP),
lower R port (helm) to R (AP).
• AP to cylinder = C1 (AP) to starboard side (cylinder), C2 (AP) to
port side (cylinder).
All Inboard & Sterndrive
Except: HC5332-2
R
H1
H2
C1 C2
R
H1
H2
C1 C2
H1 H2
C1 C2
PORTSTARBOARD
Figure 6.
All SeaStar hose connections
must be torqued to 15 ft-lbs.
CAUTION
AUTOPILOT PUMP