SeaSTAR 3510LR - Configure Output Menu

3510LR USER MANUAL
Issue 1.0 11/04
23
Configure Output Menu
This menu allows you to select which port to use for the VBS communications.
Press thee ? key until the Configure
output menu is displayed and then press
?.
Configure output
Press to enter
Set VBS output allows you to select the
port(s) to use for VBS communications.
Press ? until the desired port is displayed.
Press ↵ to save changes. The following
options can be selected:
None
Data port
Cmd port
Data & Cmd port
Set VBS output
Data port
Pressing ? again will return to the Set
Channel menu entry screen.