The essentials
››› in Selector lever positions on
page 255
››› page 254
››› page 43
Manual release of the selector lev-
er
Fig. 57
Selector lever: manual release from
position P
.
Should the power supply be interrupted,
ther
e is a manual unl
ocking de
vice located
under the console of the selector lever, on the
right. Releasing the selector lever requires a
certain degree of practical skill.
●
Unlock: use the flat part of a screwdriver
blade.
Removing the cover from the selector lev-
er
●
Apply the handbrake ›››
to ensure that
the car does not mo
v
e
.
●
Carefully pull the corners of the selector
lever boot and twist it upwards above the lev-
er handle.
Releasing the selector lever
●
Using a screwdriver, press and hold the yel-
low unlocking tab sideways ››› Fig. 57.
●
Press the interlock button on the selector
lever and move the selector lever to posi-
tion N.
●
After carrying out the manual release, at-
tach the selector lever boot on the gearbox
console again.
If the power supply should ever fail (e.g. dis-
charged battery) and the vehicle has to be
pushed or towed, the selector lever must first
be moved to position N, after operating the
manual release mechanism.
WARNING
The selector lever may be moved out of po-
sition P only when the handbrake is firmly
applied. If this does not w
ork, secure the
vehicle with the brake pedal. On a slope
the vehicle could otherwise start to move
inadvertently after shifting the selector lev-
er out of position P - accident risk!
Air conditioning
R
el
at
ed video
Fig. 58 Air conditioning
43
To Next Page
Loading...
