If you have connected the voice control via the
w
ake word, the connected infotainment replies
with “What would you like to do? ”.
●
OR: after the wake word, say the desired
command, for example: “Hola Hola” and then
“heating”.
The system scans the words spoken in the vehi-
cle after the wake word.
Connect and disconnect the wake word
●
Press HOME >
Settings > Voice control >
Activ
ate / deactivate wake word.
Wake word: Hola Hola
Commands
To help the voice control recognise commands
reliably:
●
Pronounce clearly. Confusing commands are
not recognised. Speak in a normal tone of
voice. Speak a little louder if you are driving at
high speed.
●
Avoid outside noises. Open windows and
doors can interfere with voice control.
●
Avoid other secondary noises, such as con-
versations in the vehicle. Do not direct the air
flow from the outlets towards the microphone
or the interior lining of the roof.
●
Do not make long pauses.
Voice control is active and recognises
the w
ords pronounced.
Note
●
When the activation word is disconnected,
the inf
otainment system cannot be activated
by means of the activation word. Voice con-
trol is still available via the
button on the
multifunction st
eering wheel.
●
Availability depends on country and equip-
ment.
St
art and stop voice control
Depending on the equipment, you can start
voice control in dierent ways.
Start voice control
●
Voice control activation: say the word that
activates voice control.
●
Multifunction steering wheel: press the voice
control button .
In some cases you can also start voice con-
trol of the connected mobile phone device, by
pressing and holding the voice control button.
Manually ending voice control
Voice control can be cancelled with the Can-
cel command.
●
Multifunction st
eering wheel: tap the voice
control button
once to cancel the function.
The voice control ends automatically, if you use
inf
otainment functions, if the parking system is
activated or by incoming calls.
To Next Page
Loading...
