SebArt professional line
KatanaS 120 ARF
ASSEMBLY MANUAL
The new KatanaS 120 ARF was designed by Italy aerobatic pilot,
Sebastiano Silvestri and the design is based on of his successful
and famous KatanaS Tournament Of Champion’s airplane.
This professional ARTF kit is the result of Sebastiano’s long
research in 3D performance. This combined with an extremely
lightweight structure, the all wood airframe and the big control
surfaces give the KatanaS 120E an impressive thrust-to-weight
ratio and crisp control authority at any airspeed and flight
condition.
The KatanaS 120E can do it all…unbelievable easy harriers,
torque rolls, blenders, waterfalls and almost anything else you can
dream up are waiting you!
.....the only aerobatic limit is your fantasy!
Specifications: Recommended Set Up:
Wingspan:…..........187 cm (73,61 in) Weight:....3.900 - 4.100 g. RTF less motor battery
Length:….......……186 cm (73,22 in) Radio:…..6-ch with 5 digital servos metal gear
Wing Area:…..........78 dm² (121 sq.in) Motor: …Hacker A60-22S + MasterBasic 90-Opto
Engine: …2 or 4 cycle 1.20 - 1.80
To Next Page
Need help?
General
