SebArt professional line
Wind S 110 ARF
ASSEMBLY MANUAL
The new Wind S 110 ARF was designed by Italy aerobatic pilot,
Sebastiano Silvestri.
This professional ARTF kit is the result of Sebastiano’s 20 years
experience in F3A world and his research in best F3A
performances. This innovative design combined with the
extremely lightweight structure, all wood airframe, give the Wind
S 110 ARF an impressive precision and smoothness at any
airspeed and flight condition.
The Wind S 110 ARF can be your best F3A practice plane, or…
if you install the “3D” optional elevator kit, you can let it do all…
precision aerobatics and unbelievable easy harriers, torque rolls,
blenders, waterfalls and almost anything else you can dream up
are waiting you!
.....the only aerobatic limit is your fantasy!
Specifications: Recommended Set Up:
Wingspan:…...........174 cm Weight:.........3.200-3.300 g. RTF less motor battery
Length:…........……180 cm Radio:……………………6-ch with 5 digital servos
Wing Area:…...........58 dm² Motor: …Hacker A50-16L + MasterBasic 90-Opto
Prop: ……………..……….APC 18x10E or 18x12E
Motor battery: …………4350-8S Flight Power 30C
To Next Page
Need help?
General
