Section 11 – final radio installation
For best performance and light weight, we recommend you to install as receiver & servos power
system the following item (not included):
• Power Box System “DIGI Switch” (ONLY for F3A set up)
• Power Box System “SENSOR” Switch (for F3A & 3D set up)
• Power Box System 1500 li-po battery or Flight Power 1250-2S EVO-RX li-po battery
step 1
With a hobby knife open the bay and locate the Power Box System “DIGI Switch” or “SENSOR
Switch” as per picture.
35
To Next Page
Loading...
