SebArt professional line
AngelS EVO 50E
ARF
ASSEMBLY MANUAL
The new AngelS EVO 50E ARF, was designed by the 10 times F3A
Italian Champion Sebastiano Silvestri, it is the replica of his 2
meter size F3A competition airplane, 3
rd
at the European
Championships in Swizerland 2006.
This professional ARTF kit is the result of Sebastiano’s long
research and experience in F3A world. This combined with an
extremely lightweight structure, the all wood airframe, and the
new revolutionary Lift Generator on landing gear give the
AngelS EVO 50E an impressive thrust-to-weight ratio and an
i
mpressive precision at any airspeed and flight condition.
The AngelS EVO 50E can do it all… it is ready for any pattern
sequence as for unbelievable easy torque rolls, slow speed
knifedge and almost anything else you can dream up are waiting
you!
.....the only aerobatic limit is your fantasy!
Specifications
Wing Span:……….…….....158 cm (62,6 in.) Recommended power set up:
Length:….......…….….….. 165 cm (65,4 in.) Motor:........................... Hacker A50-16S
W
ing Area:……............. 45,8 dm2 (71 sq.in.) ESC:……………………. X70 SBec-Pro
Weight:…..2.200 g. RTF less battery (77,4 oz) Battery: Flight Power 3300-6S or 3700-6S
R
adio:…..4-Channel with 4 standard servos Propeller: …….….………. APC 16x10E
To Next Page
Need help?
General
