EasyManua.ls Logo

Sebury K2 User Manual

Sebury K2
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
K2
Digital Keypad
Introduction
The K02 uses the latest microprocessor technology to operate door strikes and
security systems that require a momentary (timed) or latching dry contact closure.
All programming is done through the keypad. Codes and operating parameters are
stored within the microprocessor and can not be lost due to power failure.
The K02 can store 1000 prox cards and user 4 digit codes. Each 4 digit code has
10,000 possible combinations. The unit has one relay with 5 Amp contacts.
Question and Answer IconNeed help?

Do you have a question about the Sebury K2 and is the answer not in the manual?

Sebury K2 Specifications

General IconGeneral
PIN Length4-6 digits
BacklightYes
Operating VoltageDC 12V
Operating Humidity10% to 90% RH
Output Load3A
InterfaceWiegand 26
Dimension120 x 75 x 22 mm

Summary

Product Specifications

Programmable Functions

Details relay modes, code management, and door open detection features.

Wiring Connections

Lists components requiring wiring: electric lock, bell, push switch, contacts, alarm.

Mounting Instructions

Wiring Procedures

Programming and Operation

Engineer Programming Mode Entry

How to enter engineer programming mode using a specific code.

Master and User Code Management

Steps to change master and user codes via engineer programming.

Adding User Codes and Cards

Process for adding new user codes and prox cards.

Deleting User Cards and Codes

Options for deleting all user cards, individual cards, or codes.

Advanced Settings

System Reset and Technical Specifications

Resetting to Factory Default

Procedure to reset all settings to factory defaults using a jumper.

Technical Specifications Summary

Lists key technical details like voltage, current, relay, memory, and dimensions.

Related product manuals