Contents
1
www.sebury.com.cn
The K3/K4 uses the latest microprocessor technology to operate
door strikes and security systems that require a momentary (timed)
or latching dry contact closure.
All programming is done through the keypad. Codes and operating
parameters are stored within the microprocessor and can not be
lost due to power failure.
Store 1000 prox cards and user 4 digit codes. Each 4 digit code has
10,000 possible combinations. The unit has one relay with 2 Amp
contacts.
Introduction
Programmable Functions
Relay latching or momentary
Relay activate independently or together
Change Codes 1 master, 1000 users & prox cards
Door open detection
Programmable Timers
Door relay time 00-99 seconds
Door open detection 00-99 seconds
Alarm time 00-99 minutes
Wiring Connections
Electric lock
Specifications
Before the installation carefully read the manual
Introduction 1
Specifications 1
Intramural Interface Circuit 3
Mounting 3
Wiring 5
Power UP 7
Engineer Programming Mode 7
Changing Master & User Codes 7
Delete User Card OR Cards 8
User Operation Mode 8
Setting Door Relay Strike time 8
Setting Alarm Signal Output Time 9
Set Door Open Detection Time 9
Setting Security Arrangement 9
Resetting to Factory default setting 10
Changing User Password Code 10
Technical Specifications 11
Package Listing 11
K3/K4 user s manual
To Next Page
Loading...
