1.3 Functional component
1.4 Technical parameters
> Working voltage: DC12±2V
> Static current: ≤20mA
> Operating current: ≤100mA
> Drive electric lock current: ≤3A
> Working environment temperature: -20~50°C
> Working environment humidity: 0~95% (no condensation)
> Maximum card reading distance：5cm
2 (Installation, wiring and Debugging)
2.1 Installation
Unscrew the screw on the bottom of the product with the screwdriver, remove the back case of
the product, then according to the opening position of the back case, use the impact drill to open
the corresponding holes on the wall, including a wire outlet hole with diameter larger than 8mm,
and four plastic expansion screw holes with diameter of 6mm, then insert four matching plastic
expansion screws, and fix the back case to the wall with four matching self-tapping screws.
As shown below:
To Next Page
Loading...
