3.2 Change the master code
0 new code # new code #
Example, press 0 999999 # 999999# changed master code to 999999.
3.3 Add card user
There are three methods to add a card user, the ID number range is 0-999, the user password is
fixed to 6 digits, and it can be operated continuously. Press key * to exit the add user menu.
3.3.1 Fast way to add card user
1 swipe card … *
Example, continuously add 3 cards: Press 1, swipe card, swipe card, swipe card *
3.3.2 Add card by specify the ID number
1 ID number # swipe card … *
Example, continuously add 3 cards with ID number 1,2,3
Press 1 1#swipe card 2# swipe card 3#swipe card *.
3.3.3 Add user password by specify ID numbe
1 (ID number) # (6 digits user password) # ... *
Example, consecutively set 3 passwords with ID numbers 4, 5, and 6:
14#444444#5#555555#6#666666#*.
3.4 Delete card user
Below are three ways to delete user. The ID number ranges from 0 to 999, each ID number
corresponds to a card or a password. To delete one ID number means that one corresponding
card or password is deleted, and this can be continuously operated. Press Key * means to exit the
delete users menu.
3.4.1 Quick delete cards
2 swipe card ... *
Example, delete 3 cards continuously: 2, swipe card, swipe card, swipe card, *
3.4.2 Delete Cards or Passwords with specify ID Number
2 (ID number) # ... *
Example, delete three continuous users with ID numbers 1, 2, 3: 2,1#2#3#*.
3.1 Enter into administrator mode
* 6 digit master code #
Example, press *888888# to enter into programming mode.
888888 is the default factory master code. Must enter into the programming mode first before
undertake the following programming.
To Next Page
Loading...
