14 •
E
Data connection symbol:
shows the current connection type to the seca patient database (in this
case: Ethernet connection to PC using
seca 115)
Additional possible connection types:
• seca 360° wireless connection to PC using seca 115
• USB memory stick connected to device
F
Weight display
G
weight/height tab
Automatically active after device switched on
For determining weight and height of patient
H
bia tab
For performing a bioimpedance analysis
I
patient tab
For assigning the measured results to a seca patient file
J
analysis tab
For analyzing measured results and analysis results and for saving data
K
switch menu button
Appears if secondary menu is available
• Primary menu: contains the functions commonly used in the current
context
• Secondary menu, contains the following functions:
-
settings
- print
- save
L
Menu bar with context-dependent buttons and switch menu button
M
Hold value display
N
Weighing range currently in use:
• 1: finer increments of the weight display at a lower capacity
• 2: maximum capacity
O
Non-verifiable function is active (only for verified models)
P
Display of patient's height
• Can be entered manually
• Can be received by a seca 360° length measuring device
Q
Display of patient's body mass index (BMI)
Calculated automatically as soon as a weight is available and a height
value has been received or entered
Symbol Meaning
To Next Page
Loading...
