22 •
4.6 Operation using a seca 360° length measuring device
As an alternative to manual entry, you can also use a seca 360° length mea-
suring device to determine height and transfer this to the device via
seca 360°
wireless network.
Height is taken into account when analyzing the bioimpedance measurement.
If the device is connected to the
seca 115 PC software, height is recorded in a
seca patient file together with the other measured results and transmitted to
the
seca 115 PC software.
NOTE:
• Information on creating and saving seca patient files can be found in
the section entitled “Assigning a measurement to a patient file” from
page 36.
• Also follow the instructions for use for the
seca 360° length measur-
ing device. If you have any queries regarding data connections, con-
tact your administrator.
To Next Page
Loading...
