Seca 634 - Page 31

Service manual Spare parts list
03.02.2011/ Rei 30-34-00-056c
Display
Item Articel no. Designation Price stage
19 08-04-05-035-509 Display housing compl. 37
20 34-02-01-223-807 Housing profile, long, punched 28
21 34-02-01-216-807 Operating housing left 10
22 34-02-01-217-807 Operating housing right 10
23 34-02-01-219-807 Cover operating housing right 05
24 34-02-01-005-807 Display housing with viewing glass 15
25 34-02-01-214-009 Board holder 10
26 34-02-01-220-807 Side cap 10
27 50-00-96-520-009 Counter sunk screw PA 02
28 08-06-14-239-009 Battery compartment 15
29 08-06-18-054-009 Display electronic 40
30 34-02-04-373-009 Membrane keyboard, approved 25
34-02-04-342-009 Membrane keyboard, not approved 25
34-02-04-383-009 Membrane keyboard, Japan approved 25
31 14-05-01-930-509 Foil for viewing glass, mod.635 approved Max 200/300 kg 05
14-05-08-261-509 Foil for viewing glass, mod.635 approved Max 300 kg 05
14-05-01-918-509 Foil for viewing glass, mod. 634 not approved Max 300kg/660lbs 05
14-05-08-223-509 Foil for viewing glass, mod. 634 not approved Max 360kg/800lbs 05
32 08-06-16-081-119 Harness for battery connection 15
33 66-30-60-010-009 Battery holder 10
34 08-06-16-106-119 Modular cable 15
35 34-02-04-339-009 Tilt stand 10
36 34-02-04-340-009 Wall mounting bracket 10
(38) 68-32-10-252-009 Plug in power supply unit seca 447 32
68-32-10-263-009 Plug in power supply unit Switch mode seca 440 28
for Mod 634 to ser. no. 163403609xxxx
for Mod 635 to ser. no. 163503609xxxx
68-32-10-265-009 Plug in power supply unit Switch mode seca 400 28
for Mod 634 from ser. no. 163403709xxxx
for Mod.635 from ser. no. 163503709xxxx
(39) 14-05-01-886-009 Calibration count sticker 01
(40) 14-05-01-870-009 Foil for calibration count sticker 01
(41) 18-01-07-031-009 Cardboard box compl. 30
(42) 18-01-01-537-009 Cardboard box 25