Operation • 81
17-10-07-653-100_01-2020B
5.11 Transporting the device
The device is equipped with recessed handles which enable transport over
short distances.
1. Remove the drip guard.
2. Raise the device by reaching into the recessed handles.
3. Transport the device to its new setup location.
4. Set up the device ➔ Setting up the device, page 76.
5. Re-establish all cable connections.
6. Install the drip guard.
6. OPERATION
WARNING!
Injury from falls
► Ensure that the device is positioned firmly and level.
► Route connecting cables (if present) in such a way that neither user
nor patient can trip over them.
► Assist people with limited motor skills when they are getting up, e.g.
from a wheelchair.
► Make sure that the patient does not step onto and off the weighing
platform right at the edges.
► Make sure that the patient steps onto and off the weighing platform
slowly and safely.
WARNING!
Danger of slipping
► Ensure that the weighing platform is dry before the patient steps
onto it.
► Ensure that the patients feet are dry before he or she steps onto the
weighing platform.
► Make sure that the patient steps onto and off the weighing platform
slowly and safely.
NOTE
The availability of some functions is dependent on the device mode. If
you require functions that are not available in the current device mode,
ask your administrator or hospital technician whether the device mode
can be changed.
To Next Page
