Seca 676 - Activating Beeps (BEEP); Setting Filtering (Fil)

Operation • 79
English
1. Select the item "Ahold" from the menu.
2. Confirm your selection.
The current setting is displayed.
3. Select the desired setting:
–on
–off
4. Confirm your selection.
You exit the menu automatically.
Activating beeps
(BEEP)
You can set whether a beep is heard every time a key
is pressed and when a stable weight value is achieved.
The latter is significant for the Hold/auto hold function.
NOTE
The "Beep when weight is stable" function is
activated at the factory. You can deactivate this
function if desired.
1. Select the item "BEEP" from the menu.
2. Confirm your selection.
3. Select a menu item.
– Press: beep when key is pressed
– Hold: beep when weight value is stable.
4. Confirm your selection.
The current setting is displayed.
5. Select the desired setting:
–on
–off
6. Confirm your selection.
You exit the menu automatically.
7. If you also want to activate beeps for the second
function, repeat the process.
Setting filtering (Fil) Filtering (Fil) allows you to reduce interference (e.g. as a
result of patient movement) when determining weight.
1. Select the item "Fil" from the menu.
2. Confirm your selection.
The current setting is displayed.