20
Automatic switch-off/economy mode
The scale switches off automatically after 3 minutes.
Taring weight display (TARE)
The tare function is very useful, for example for determining the weight of a child, animal
or other object placed on the scale in addition to yourself.
Proceed as follows:
– Press the Start key with no load on the
scale.
– First stand on the scales yourself with-
out the additional weight and activate
the Tare function by pressing the TARE
key.
The display is reset to zero.
0.0 appears
in the display. The note “NET” appears.
– Now take the additional load onto the
scale. You can leave the scale to do so,
in which case
---- appears.
The scale determines the weight of the
additional load.
You can now perform as many weigh-
ing operations as you like.
– Press the key down again to deactivate
the Tare function; the scale is then back
in normal weighing mode and the tare
value has been erased.
– The tare value is likewise erased by the
scale being switched off.
Store weight value (HOLD)
You can also continue displaying the weight determined once the load has been removed.
This makes it possible to look after a patient first, before having to note the weight.
– Press the HOLD key whilst the load is
on the scale.
“HOLD“ appears in the digital display.
The value is stored in the display until
the scale switches off automatically af-
ter 3 minutes. The triangle with the ex-
clamation mark indicates that this
frozen display is an additional facility
which is not subject to calibration.
– The HOLD function can be switched off
by pressing the HOLD key again.
To Next Page
Loading...
