EasyManua.ls Logo

Seca 874 - Scale Setup and Alignment; Operation; Weighing Procedures

Seca 874
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation • 11
English
4.3 Setting up and aligning scale
1. Place the scale on a firm surface.
2. Align the scale by turning the foot screws.
The air bubble in the spirit level must be located in the exact center of the
circle.
3. Ensure that only the feet of the scale are in contact with the ground. The
scale may not be in contact anywhere else.
NOTE:
The alignment of the base of the scale must be checked every time
the scale is moved and corrected if required.
5. OPERATION
5.1 Weighing
Starting the weighing procedure 1. Ensure that there is no load on the scale.
2. Press the
start key.
 appears in the display, then all the elements of the display are
shown briefly.
The scale is operational when
 appears in the display.
If the scale is operated with a power supply unit, the symbol appears in
the display.
3. Switch the weight display if necessary (see "Switching weight unit" on
page 12).
4. Stand on the scale and keep still.
NOTE:
The HOLD function is activated automatically at weights of over 1.5 kg
or 3.3 lbs. The display flashes until a stable weight has been mea-
sured. The display then freezes until the next weighing operation.
HOLD appears in the display.
5. Read off the measured result.
Weighing babies/toddlers (2-in-1) The 2 in 1 function can be used to determine the weight of babies and tod-
dlers. The child is held in an adult's arms during weighing to do so. Proceed
as outlined below.
1. Ensure that there is no load on the scale.
2. Ask the adult to stand on the scale.
3. Read off the measured result.
4. Keep the
2 in 1 key depressed until the message NET appears in the
display.
The weight is saved.
 appears in the display.
ATTENTION!
Incorrect measurement as a result of changing starting weight
If weighing of the child commences with a different starting weight, it
will not be possible to determine the child's weight correctly.
Ensure that the child is always weighed with the adult with whom the
starting weight was determined.
Ensure that the adult's weight does not change - as a result of their
taking off a piece of clothing, for example.
Spirit level
kg

2-in-1 key

Other manuals for Seca 874

Related product manuals