Do you have a question about the Secomea SiteManager 1029 and is the answer not in the manual?
Explains power supply connections, GND, 0V, and Shield potentials for SiteManager.
Details input voltage levels, states, and the internal pull-up resistor for SiteManager.
Describes Input port 1's default role in controlling GateManager access.
Demonstrates connecting a switch to Input 1 for remote access control.
Illustrates using a 24V relay with a high-side switching input.
Explains how to reconfigure Input 1's default action via the SiteManager GUI.
Provides steps for configuring email alerts triggered by input ports on GateManager.
Details configuring SMS alerts for input ports on SiteManager models with 3G.
Explains output port characteristics, voltage limits, and pull-up resistor requirements.
Describes default actions for Output port 1 and Output port 2.
Shows connecting an output port to a low-side switching input, potentially with a relay.
Demonstrates using a 5V or 24V relay with high-side switching outputs.
Explains how to configure Output 2 to signal GateManager connection status.
Contains copyright, usage rights, and contact information for Secomea A/S.
Lists trademarks associated with Secomea products like GateManager and SiteManager.
Outlines Secomea's right to change specifications and limits liability.
Loading...