To Next PageTo Next Page
Need help?Do you have a question about the Secomea SiteManager 3229 and is the answer not in the manual?
Details input port voltage behavior, ON/OFF states, and the internal 10 Kohm pull-up resistor.
Describes the default assignment of Input Port 1 for GateManager Access and Input Port 2.
Illustrates connecting a simple switch to Input 1 for controlling remote access via low-side switching.
Demonstrates using a 24V relay with a high-side switching input for controlling equipment connected to SiteManager.
Guides users on reconfiguring the default function of Input Port 1 through the SiteManager GUI settings.
Explains the process of setting up email alerts triggered by input ports using a GateManager administrator account.
Details configuring local SMS alerts based on input port triggers for SiteManager models with 3G modems.
Covers the "open drain" nature of output ports, voltage limits, impedance, and current protection.
Explains the default operations of Output Port 1 (GateManager connection) and Output Port 2 (toggle or connection status).
Shows connecting SiteManager output ports directly to equipment with low-side switching inputs.
Illustrates using relays with SiteManager outputs for high-side switching inputs, requiring external circuitry.
Guides users on configuring Output Port 2 to signal GateManager connection status via the SiteManager GUI.
General
