Sector Marathon - Setting Time1, Time2, Keytone & Hourly Chime

4.3 Setting time1, time2, keytone & hourly chime
- Press and hold S4 for 2 sec to enter the Time Setting Mode
- Press S1/S2 to switch among setting branches:
(Time setting mode) → Time 1 setting → Time 2 setting →
Option setting → Hands SET setting
- Under above setting branches, use S3/S4 to select SET item as below, use S1/S2 to
increase or decrease the SET item.
(Time 1 setting) → SET Hour → SET Minute → SET Second → SET Year → SET Month
→ SET Day Time 1
(Time 2 setting) → SET Hour → SET Minute → SET Second → Time 2
(Option setting) → SET Hour format → SET Keytone → SET Hourly Chime → SET Night
Mode → Option
(When night mode is enabled, press any key to turn on the EL. Night mode will be turned off
automatically after 8 hours.)