6.4.3 SET DEVICES
In SET Devices mode, press S3 to select next item. Use S1/S2 to turn item ON or OFF.
(SET Device) Phase Sound → HRM → Foot Pod → Sport Alarm → Pairing → SET Device
Remark:
Phase Sound: ON=generate sound at the end of each phase
HRM: OFF=disable HRM function and HRM alarm
Foot Pod: OFF=disable foot pod function and disable speed alarm
6.4.3.1 Paring devices
- In SET Devices mode, press S3 until Pairing mode appears
- Press S1 to start Searching. During Searching the Speedometer icon will animate. Press S1
or S2 to stop searching and return to Pairing mode.
- If compatible device is within searching range, Row 2 will display Found & then press & hold
S4 for 2 seconds to exit set device. The ID is now stored in Marathon. (If no devices are found
after 30 seconds, the watch will return to Pairing mode after 3 seconds.)
- Press S3 8 times to cycle back to Sport mode again, the learned ID will be activated & ready
to communicate with devices.
To Next Page
Loading...
