Sector Marathon - Chrono; Record Data; Check Data

CHRONO
9
9.1 Record data
- In Normal Time Mode, press S3 four times to enter the chronograph mode.
- Press S1 to start recording for Lap 1
- Press S1 again to stop recording for Lap 1 and start recording for Lap 2. The split time will
continue to count. There are total of 99 Laps memory for data recording.
9.2 Check data
- At the running chronograph, press S2 to stop counting.
- Press S4 to show the record and then S1/S2 to review the Lap record.
- Press S3 to return to running chronograph.
- Press and hold S2 for 2 seconds to reset.
Remarks:
1/100 sec accuracy for the first hour and 1 sec accuracy for the rest of time.
Top row display Lap time, mid row display the Lap number and bottom row display split time.