SECTION 8 INSTALLATION AND CONNECTIONS
Doc No.: A05160691 REV Q ECO 12425 Date: 03/27/17 23
4 & 8 Channel Nurse Station Connections
1 43
2
12V
+ -
NOC
1 43
2
12V
+ -
NOC
+ G
+ G
4 12
3
4 12
3
G
G
Shield to
ground
ELEV
NURSE
LOCK
LOCK
NO C NC
NO C NC
NO C NC
NO C NC
ELEV
NURSE
LOCK
LOCK
NO C NC
NO C NC
NO C NC
NO C NC
Second
Nurse
Station
First
Nurse
Station
Adv 1000DE
Exit Panel
Relay switches during alarm
Shield to
ground
Figure 8-10 Single or Double Nurse Station Connections
LED Nurse Station Annunciator
A02030901 (A02040901)
The A02030901 (A02040901) Nurse Station Annunciator is a basic dry contact driven series of LED’s and piezo
sounders designed to provide a specific location of a device in alarm. There are no communication requirements
from the field device to the annunciator. The field device can provide a dry contact closure during an alarm
event. If each field device is wired properly to the remote annunciation location, the closure will provide an
alarm on one of four (or eight) LED locations on the face of the unit.
Each field device requires a two conductor shielded home run (single length of wire from beginning point to end
point) without any breaks or splices. LED Nurse Stations with Part # 203 or 204 are not compatible with
LED Nurse Stations with part #’s A02030901 and A02040901
The A02030901 Nurse Station Annunciator requires a mounting box A10000210 for flush mounted applications
and mounting box 401 for surface mounted applications. The A20240901 Nurse Station Annunciator requires a
mounting box 449 for flush mounted applications and mounting box 448 for surface mounted applications.
Figure 8-11 Nurse Station Front View
Secure Care Products
TM
Made with Pride in the U.S.A.
To Next Page
