The ChannelPlus H17XL has a number of default settings which
are normally installed. These settings are designed to reduce the
need for user intervention upon installation of the timeswitch.
However it is possible to customise the user display by following
the procedures in the following pages. The factory default
normally installed are illustrated below;
Adjusting Default Settings
Time and Date Clock Options Headings
are factory set
Time and calendar Time displayed in
24hr clock format
i.e. Heating, Hot Water
or None
Channel heading set
to standard installation
10:42
FRIDAY
24 MAR
22:42
Options Options Options
The timeswitch has
been set with the
current time and date
during manufacture.
No alteration should be
required to the time and
date. However, if any
modification is required
please refer to the
flowchart on page 11
24 hour
AM / PM
or
Water
Heating
None
10
HTG
ALL DAY
Off until
22.30
FRIDAY
24 MAR
HTG
ALL DAY
Off until
22.30
10:42
FRIDAY
24 MAR
HTG
ALL DAY
Off until
22.30
To Next Page
Loading...
Need help?
General