Secure 2 Series - Adjusting Channel Headings; Channel Headings Adjustment Procedure

The timeswitch has been preset without a channel heading on
the display. If you require either the 'Water' or 'Heating' options
then please follow the flowchart below.
Adjusting Channel Headings
Open cover
Press the green
‘SET’ button
Use the + and -
button to select
‘SET DEFAULTS’
Press ‘ENTER’
Use the + and -
button to adjust
‘HEADINGS’
Press ‘ENTER’
Use the + and -
button to adjust
HEATING /
WATER
or NONE
Press ‘ENTER’
Press the green
‘SET’ button
Sample Display
TIME AND DATE
SET DEFAULTS
CLOCK OPTIONS
HEADINGS
WATER
HEADINGS
NONE
HEATING
Press the green
‘SET’ button
Close Cover
13
SET ON/OFF TIMES
SET HOLIDAY MODE
SET DEFAULTS