SL150 Installation and Setup Guide
19–4
5. Press 8 to save the custom word(s) and return to the “CUSTOM WORD ?” display.
Repeat Steps 2–5 for other custom words to be entered. To change a custom word, just
overwrite it. If no more are to be entered now, press 0 to return to the Descriptor entry.
The custom word(s) will be automatically added to the built-in vocabulary.
If a custom word exists, and you want to replace that word with a shorter one, do the following:
after the last character of the new word is entered, press 6 + 00 + 8. This removes all the
additional characters of the old custom word.
When zone descriptors are being entered as described in Step 6 of Programming Zone
Descriptors, the custom word numbers are 245 to 254 for words 1 to 10, respectively.
To Next Page
Loading...