SecurUS BLUtag - Editing Zones Via the Zones Tile

1. To search for the zone, if necessary, use the Find Zones menu on the left.
2. Click Edit.
3. To correct the zone’s location, drag its center point.
4. To adjust the Radius, type a new size and click Apply. (Or, drag one of its outer
points.)
5. To change the address, use the Locate bar and Find button.
6. Click Save when finished.
7. To proceed with scheduling the zone, click Add Schedule.
1
2
ZonesZones
Editing Zones via the Zones Tile
30
4
3
5
6