TA Operation/Maintenance Instructions Page 2 of 36
EC Declaration of Conformity
The manufacturer:
M. Sedgwick & Co. Ltd
Stanningley Field Close, Leeds LS13 4QG
United Kingdom
Telephone +44 113 257 0637
www.sedgwick-machinery.co.uk
Email: admin@sedgwick-machinery.co.uk
declares that the Sedgwick TA315 Tilt Arbor Sawbench, when installed, maintained, and
used in applications for which it was designed, and in compliance with the
manufacturer’s instructions, complies with the provisions of the following European Union
legislation, wherever applicable:
2009/127/EC Machinery Directive
2014/30/EC Electromagnetic Compatibility Directive
BS EN ISO 19085-1:2017 Safety of Machinery. Basic Concepts, General Principles of
Design. Basic Terminology, Methodology.
BS EN 1870-19:2013 Safety of woodworking machines. Circular saw benches (with
and without sliding table)
EN 60204-1:2018 Safety of machinery. Electrical equipment of machines. General
requirements
Signed for and on behalf of the manufacturer:
Managing Director
M. Sedgwick & Co. Ltd, Jan 2022
To Next Page
Loading...