Sega ATV Slam - Page 2

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TO MAINTAIN SAFETY:
To ensure the safe operation of this product, be sure to read the following before usage:
The following instructions are intended for the users, operators and the personnel in charge of the
operation of the product. Aer carefully reading and suciently understanding the warning displays
and cautions, handle the product appropriately. Be sure to keep this manual close to the product or in
a convenient place for future reference.
Herein, explanations which require special aention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of "DANGER", "WARNING", "CAUTION", etc. are used.
Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will cause
severe injury or death
Indicates that mishandling the product by disregarding this warning will cause a
potentially hazardous situation which can result in death or serious injury
Indicates that mishandling the product by disregarding this caution will cause
a slight hazardous situation which can result in personal injury and/or material
damage
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE". In order to protect the human body and equipment, this
display is aached to places where the instruction manual should be referred to
Indicates a "protective earth terminal." Before operating the equipment, be sure to connect
it to the ground (this step may be omied for products in which a power cable with earth is
used)
•
PERFORM WORK IN ACCORDANCE WITH THE INSTRUCTIONS HEREIN STATED
Instructions for work are explained by paying aention to the aspect of accident prevention. Failing
to perform work as per the instructions can cause accidents. In the case where only those who have
technical expertise should perform the work to avoid hazardous situation, the instructions herein
state that the site maintenance personnel should perform such work
•
BE SURE TO TURN OFF THE POWER BEFORE WORKING ON THE MACHINE
To prevent an electric shock, be sure to turn o the power and unplug the power cable before
carrying out any work that requires direct contact with the interior of the product. If the work is to
be performed in the power-on status, the instruction manual herein always states to that eect
•
BE SURE TO GROUND THE EARTH TERMINAL (THIS IS NOT REQUIRED IN THE CASE WHERE A
POWER CABLE WITH EARTH IS USED)
This product is equipped with the earth terminal. When installing the product, connect the earth
terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the
product is grounded appropriately, the user can be subject to an electric shock. Aer performing
repair, etc. for the control equipment, ensure that the earth wire is firmly connected to the control
equipment
•
ENSURE THAT THE POWER SUPPLY USED IS EQUIPPED WITH AN EARTH LEAKAGE BREAKER
Using a power supply which is not equipped with the earth leakage breaker can cause a fire when
earth leakage occurs
•
BE SURE TO USE FUSES WHICH MEET THE SPECIFIED RATING (ONLY FOR THE MACHINES
WHICH USE FUSES)
Using fuses exceeding the specified rating can cause a fire and an electric shock