GRAPHICS DISPLAY
69
11
11-3 ADJUSTMENT METHOD
All adjustment values are set accurately at the time of shipping from the
factory. Do not readjust these values needlessly or apply adjustments not
specied in this manual. The display may not appear properly if the values
are incorrect.
CONTROL - ADJUSTMENT PROCEDURE
This sections explains basic control procedures for making adjustments using the buttons on
the 'Monitor Adjustment Board'
This Adjustment Board, and the Monitor Power Supply are located on the rear of the LCD panel.
Remove the (2) M4x30 screws and unlock the rear door. Remove the door and place to one side.
To Next Page
Loading...
