9
3. PARTS LIST
ITEM NO. PART NO. DESCRIPTION
1 999-0777 MARQUEE GRAPHIC ZBX KIT
2 999-0779 INSTRUCTION SHEET ZBX KIT
3 999-0780 SUB INSTR SHEET ZBX KIT
4 999-0785 CNTRL PNL OVERLAY ZBX KIT
5 999-0786 STICKER CABI SIDE L ZBX KIT
6 999-0787 STICKER CABI SIDE R ZBX KIT
STICKERS AND GRAPHICS
JOYSTICKS AND BUTTONS
ITEM NO. PART NO. DESCRIPTION
1 610-6723-4C01 ASSY ANALOG JOY 4C GREEN
2 58-9133-L *PUSH BUTTON GREEN
3 58-9155-L *PUSH BUTTON YELLOW
4 95-0733-01 *MICRO SWITCH SILVER CONTACT
KIT INSTALLATION INSTRUCTIONS
1.) Install VGA Output to Jamma Interface.
2.) Install USB connector to Naomi Filter Board Port.
3.) You can use one of the extra grounds (shown in the picture on
the following page) to go out to switched inputs. (The 5V and 12V
can be used for whatever you like-coin meter, etc.)
MONITOR INFORMATION
You can use a
Standard Resolution-15,750K x 60 (#1 ON & #2-4 OFF)
or
High Resolution-31,000K x 10 (#1-4 OFF)
DIP SWITCH SELECTABLE
(Switch #1 on NAOMI FILTER BOARD)
To Next Page
Loading...
