BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The following
instructions are intended for the users, operators and the personnel in charge of the operation of the product.
After carefully reading and sufficiently understanding the warning displays and cautions, handle the product
appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it
when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the poten-
tially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the
contents of the displays before reading the text.
Indicates that mishandling the prod-
uct by disregarding this warning
will cause a po
tentially hazardous
situation which can result in death
or serious injury.
Indicates that mishandling the product
by disregarding this caution will cause
a slight hazardous sit
uation which can
result in personal injury and or material
damage.
For the safe usage of the product, the following pictographs are used:
Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this dis-
play is attached to places where the Owner
’s Manual and or Service Manual should be referred to.
Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform
work as per the instructions can cause accidents. In the case where only those who have technical expertise
should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should
perform such work.
Be sure to turn off power before working on the machine.
To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the in-
terior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always
states to that effect.
Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth
is used).
This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the
“accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately,
the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the
Earth Wire is firmly connected to the Control equipment.
Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.
This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with
the Earth Leakage Breaker can cause a fire when earth leakage occurs.
Be sure to use fuses which meet the specified rating. (only for the machines which use fuses).
Using fuses exceeding the specified rating can cause a fire and electric shock.
WARNING!
CAUTION!
To Next Page
Loading...
Need help?
General
