d. GUN CALIBRATION SETTING
Select GUN CALIBRATION SETTING to display the following screen.
Perform the sight settings for the guns to be used in the game.
Use the SERVICE Button to move the cursor to the desired test item. Press the
TEST Button to enter the selected item’s test. Details for each item are as follows.
d-1. GUN MARK CHECK:
Checks the gun sights. 1P and 2P guns are checked at the same time.
d-2. PLAYER1 GUN ADJUSTMENT:
Adjusts the sight for the Player 1 side.
d-3. PLAYER1 GUN DEFAULT ADJUSTMENT:
Adjust the default sight settings for the Player 1 side.
d-2. PLAYER2 GUN ADJUSTMENT:
Adjust the sight for the Player 2 side. (Operated in the same way as PLAYER1
GUN ADJUSTMENT)
d-3. PLAYER2 GUN DEFAULT ADJUSTMENT:
Adjust the default sight settings for the Player 2 side. (Operated in the same way as
PLAYER1 GUN DEFAULT ADJUSTMENT)
After changing the settings, select EXIT and press the TEST Button to return to the
Game Test Mode screen.
GUN CALIBRATION SETTING
GUN MARK CHECK .......................................... d1
PLAYER 1 GUN ADJUSTMENT........................... d2
PLAYER 1 GUN DEFAULT ADJUSTMENT ......... d3
PLAYER 2 GUN ADJUSTMENT........................... d4
PLAYER 2 GUN DEFAULT ADJUSTMENT ......... d5
EXIT
SELECT WITH SERVICE AND PRESS TEST
->
d-1. GUN MARK CHECK
This checks gun sights. Select GUN MARK CHECK on the Gun Calibration Setting
screen and press the TEST Button.
1P Gun Cross: This is displayed when the gun is pointed at the screen. 1P is red.
2P Gun Cross: This is displayed when the gun is pointed at the screen. 2P is blue.
“OUT OF SCREEN” is displayed when the gun cross is perceived to be out of screen.
Pointing the gun at the screen displays the gun cross (sight) for that gun. You can check
to see if the sight lines up properly at this screen.
Press the TEST Button when everything has been checked. You will return to the Gun
Calibration Setting screen.
GUN MARK CHECK
+OUT OF SCREEN P1+ +OUT OF SCREEN P2+
PRESS TEST TO EXIT
d-2. PLAYER1 GUN ADJUSTMENT/PLAYER2 GUN ADJUSTMENT
This item adjusts the Player 1 gun sight. (This is the same for “PLAYER2 GUN ADJUSTMENT”.)
Select PLAYER1 GUN ADJUSTMENT on the Gun Calibration Setting screen and press the TEST Button.
NOTE: “PLEASE SHOOT GRID WITH PLAYER1 GUN” on the screen will fl ash.
Follow the on-screen instructions to adjust the gun sight settings. Aim at the mark in the upper left corner and fi re. The mark in the upper left will disappear,
and the same mark will be displayed in the lower right corner.
(Press the TEST Button to return to the Gun Calibration Setting screen with canceling the adjustment.)
PLAYER 1 GUN ADJUSTMENT
<--- PLEASE SHOOT GRID WITH PLAYER 1 GUN
PRESS TEST TO EXIT
PLAYER 1 GUN ADJUSTMENT
PLEASE SHOOT GRID WITH PLAYER 1 GUN ---->
PRESS TEST TO EXIT
28
To Next Page
Loading...
Need help?
General
