When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or dam-
age to the machine.
1. HANDLING PRECAUTIONS
- Before performing work, be sure to turn the power off. Performing work without turning the power off can cause electric shocks or
short circuits. In the case that work should be performed with the power on, this will be clearly stated in the manual.
- To avoid electric shocks and short circuits, do not plug in or unplug the machine quickly.
- To avoid electric shocks, do not plug in or unplug the machine with wet hands.
- Do not leave power cords and earth wires exposed on the surface (fl oor, passage, etc.). If exposed, the power cords and earth wires are
susceptible to damage. Damaged cords and wires can cause electric shocks or short circuits.
- To avoid causing a fi re or electric shock, do not put things on or damage power cords.
- During or after installation of the product, do not unnecessarily pull the power cord. If damaged, the power cord can cause a fi re or
electric shock.
- In case the power cord is damaged, ask for replacement from the point-of-purchase or the offi ce herein stated. Using a damaged cord
can cause a fi re, electric shock or leakage.
- Be sure to perform grounding appropriately. Inappropriate grounding can cause electric shocks.
- Be sure to use fuses meeting the specifi ed rating. Using fuses exceeding the specifi ed rating can cause a fi re or electric shock.
- Ensure that connectors for IC board and others are properly inserted. Insuffi cient insertion can cause an electric shock.
- Specifi cation changes, removal of equipment, conversion and/or additions not designated by SEGA are not permitted.
- Failure to observe this may cause a fi re or electric shock. Non-compliance with this instruction can have a negative0
effect upon the physical condition of the players or the onlookers, or result in injury during play.
- SEGA shall not be held responsible for damage or compensation for damage to a third party, caused by specifi cation
changes not designated by SEGA.
- Be sure to perform the periodic maintenance inspections herein stated.
For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful
in this regard. The projector is employed for this machine. The projector’s screen is susceptible to damage, therefore, be very careful
when cleaning the screen. For details, refer to the section “Projector.”
Do not turn the power on and off continuously. Repeatedly turning the power on and off may cause product malfunction or parts dam-
age. Some parts are not specifi cally designed and manufactured for this game machine. The manufacturers may discontinue, or change
the specifi cations of, such general-purpose parts. If this is the case, SEGA cannot repair or replace the damaged game machine, whether
or not the warranty period has expired.
CONCERNING THE STICKER DISPLAY
CONCERNING WARNING DISPLAYS
This SEGA product has stickers attached describing the product manu-
facture No. (Serial No.) and Electrical Specifi cations. It also has a Sticker
describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and
Name of Machine indicated on the Sticker. The Serial Number indicates the
product register. Identical machines could have different parts depending on
the date of production. Also, improvements and modifi cations might have
been made after the publication of this manual. In order to ensure you order
the correct parts, mention the Serial No. when contacting the applicable
places.
This SEGA product has warning displays on stickers, labels and/or printed in-
structions adhered/attached to or incorporated in the places where a potentially
hazardous situation could arise. The warning displays are intended for ac-
cident prevention for customers and for avoiding hazardous situations relating
to maintenance and servicing work. Some portions of the cabinet contain high
voltage and may cause accidents if touched. When performing maintenance,
be very careful of the warning displays. It is especially important that any
complex repair and replacement work not mentioned herein should be per-
formed by those technical personnel who have knowledge of electricity and
technical expertise. In order to prevent accidents, caution any customer
ignoring the warnings to stop immediately.
EPILEPSY CAUTION STICKER
Part#: 99-30-014
CAUTION STICKER FOR GUN
HOD4 (2)
Part#: 515-30-215
62”DX and 52”DX
*Picture is 62”DX
1
To Next Page
Loading...
Need help?
General
