Segway CUBE-2000 - Appendix: Battery Expansion

Place the battery pack on the base.
Tighten the four screws.
1
2
3
4
（3N·m）
Base
* Align with the position as illustrated and
place the battery pack.
Base
3
4
Segway Cube
Expansion Battery
Appendix: Battery Expansion
* Do not use the electric tool to loosen screws!
* Do not use the electric tool to tighten screws!
Loosen the four screws with the (7/64'') 3 mm Allen Wrench.
Seperate the inverter and the base.
Inverter
Base
Allen wrench
1
2
3
4
Inverter
Base
1
2
（3N·m）
EN EN
25 26