5
1
2
3
4
5
How to Recharge the Power Station
The power station has two charging ports, AC charging port and solar/car charging port. When recharging the power
station, the display will show the charging status. There are five charging methods as below, dual-charging is also available.
AC charging
AC charging
Car charging
Car charging
Solar charging
AC and solar charging
AC and car charging
4
When the power station is on, press the AC ON/OFF Button to turn on AC output, connect the device to the AC socket.
AC Output
5
UPS Function
When the UPS function is turned on:
① Plug the AC charging cable into the wall outlet and connect the other end to the AC charging port of the power sation.
② Press the AC ON/OFF Button to turn on the AC output, connect the AC device to the AC socket.
* At this point, UPS function is activated, and the power station will automatically switch to inverter-powered when the
power grid fails.
②
①
EN EN
11 12
To Next Page
Loading...
Need help?
General
