Note: Before updating the firmware ensure that
The mower is in the charging station.
The mower is connected to a network and the signal is strong (through 4G or Wi-Fi).
The battery power is more than 20%.
There is no mowing task scheduled in the next hour.
Activate the mower
Enable Bluetooth on your phone, log in to the app and
follow the instructions to pair with the mower.
2
Wait patiently for 3 min until the ambient light turns green (or blue).
3
Connect the charging station to the power supply. Make
sure the mower is in the charging station.
1
If the light flashes yellow for more than
3min, it means the satellite signal is weak.
Please return to Step 1 in chapter 2.2 .
Secure the charging station with the nails supplied and secure the extension cable.
4
Update the mower to the latest rmware
To fully experience Navimow, prior to use, please upgrade to the latest firmware.
How to update:
After activating the device, maintain the network connection state, follow the guidance in the pop-up window, and wait for 10-15 min to
automatically complete the device update. During this process, please do not power off or perform other operations. You can start
using it after the app prompts that the update is successful.
22
To Next Page
Loading...
