3.8 IoT
Navimow is an Internet of Things (IoT) device. Connect the mower to the Internet via cellular network or your Wi-Fi network,
enabling the following functionalities:
1. Firmware Updates Over-The-Air (OTA), keep your mower updated to the latest features.
2. Enables remote control through the network: start mowing, stop mowing, return to charging station, set mowing schedule, set
cutting height and other functions.
3. Remotely monitor the mowing progress and mower location.
4. Report error code and mower status through the network.
5. Anti-theft ( 4G connection only).
Wi-Fi
See Network setting in 3.6 Settings (Mower) for more details.
NOTES:
Navimow only supports 2.4GHz Wi-Fi network.
If you are using an iOS device, the mower can only connect to the Wi-Fi that your mobile device is connected to. Please follow
the instructions in the app. Connect your mobile device to the Wi-Fi first, then connect the mower to the same Wi-Fi. There are
no such requirements for Android devices.
4G
H800A-VF, H1500A-VF, and H3000A-VF models use both Wi-Fi and cellular data networks, which will connect the mower to the
Internet after activation. The usage of cellular data will incur charges.H800N-VF and H1500N-VF models come with one year of
free data after activation. The H3000N-VF model comes with three years of free data after activation. You can go to Settings >
MOWER > Basic info in the app to check the expiration date of free data.
When the free data period expires, you need to recharge your 4G data plan via the app so that you can continue to use the IoT
and OTA functions.
If the 4G data is not recharged, the SIM card will remain effective for 2 years. The recharging and activation can be done at
anytime during these 2 years. However, after 2 years you cannot activate it anymore. You need to replace the hardwares through
the after-sales service. You need to pay the repairment and service fee as well.
Firmware updates
We will update the firmware periodically to fix security vulnerabilities and improve the existing features. After firmware updating,
you can experience new features and have a better use experience. When a new firmware version is available, you will receive a
pop-up notification in the app. Please follow the instructions shown on the pop-up window to complete the update. A firmware
update usually takes 10-15 minutes.
To manually check for updates, go to Settings＞MOWER＞Device management > Firmware version.
To update the firmware successfully, the following conditions need to be met:
-The mower is in the charging station.
-The mower is connected to a network and the signal is strong (through 4G or Wi-Fi).
-The battery power is more than 20%.
-There is no mowing task scheduled in the next hour.
NOTE: Some new features might require the app and the mower to be updated to certain versions and above, please check our
release notes for more details.
WARNING
Do not power o the device or run other operations during the update.
42
To Next Page
Loading...
