How does Navimow mow your lawn
NOTE：
1. Before mowing for the first time, please cut your lawn to a height of no more than 6 cm.
2. During the working process, if the battery is low (< 10%), the mower will stop mowing and return to the charging station to
charge. After fully charged, it will automatically return to the position where it previously stopped and continue mowing.
3. The mowing progress can be seen on both the app and the display of the mower. The mowing progress is defined as: current
mowed area/total work area.
Start Mowing
NOTE: If the mower is in lock status, first enter the PIN code to unlock the mower (see How to enter PIN code in 3.1).
There are three ways to start mowing:
3.3 Mow
This part is mainly about how the mower works, how to start and pause it during daily work, etc. Work settings related to mowing,
such as: scheduled mowing, how to change cutting height, map management, etc., see 3.6 Settings (Mower).
Edge cut
Before mowing the work area, the mower will cut along the boundary.
For optimal mowing results, the mowing path pattern rotates at certain angle for each new mowing task. Therefore, Navimow will
not leave indentations on the lawn.
Planned cut
Unlike most robotic lawnmowers, inside the work area, the lawnmower will mow the lawn along a planned path by an algorithm for
maximum efficiency.
32
To Next Page
Loading...
