If the mower goes beyond the boundary, make sure the satellite signal is strong at the problematic spot. The mower and the GNSS
antenna need to see satellites to have accurate positioning. You can try to relocate the charging station, set the map again, and
then test one more time. Get help from professional technicians when necessary. Contact your nearest dealer to solve problems.
You can also send an email to our after-sales service. Email: support-navimow@rlm.segway.com
2.5 Test Drive
After saving the map, tap 'TEST' in the app to see if the mower works within the map. The mower will navigate along the
boundary, o-limit island, and channel to test the map. After completing the test, the mower should be able to drive into the
charging station and exit on its own. During the test, you need to observe whether the walking path is consistent with the
mapping.
If you are adjusting the map or have a VisionFence Sensor installed, This test drive can be skipped.
27
To Next Page
Loading...
