Step 3: Create a channel to connect separate areas
Following the instructions in the app, create a channel between separate boundaries.
>
1m
(3.3 ft)
Boundary
O-limit island
Channel
NOTE: When creating a channel:
Do not choose ground that is bumpy, muddy, or wet.
The width of the channel needs to be greater than 1 m(3.3 ft). In order to ensure smooth passage, when establishing the channel,
please drive along the centerline of the passable area. Being too close to the edge may scratch the mower during work.
Step 4: Adjust the map
You can always adjust parts of the map in the Navimow app instead of re-creating it. Just go to Settings>MOWER>Map management>Edit,
tap a boundary or off-limit island, and then tap the edit icon.
26
To Next Page
Loading...
