Segway Ninebot S-PLUS - Charging

1. Install the App and register/login.
2. Power ON the Segway S-PLUS. The Bluetooth icon blinking indicates the Segway S-PLUS is waiting for a connection.
3. 3 Click “Vehicle”¹”Search device” to connect to your Segway S-PLUS. The Segway S-PLUS will beep when the connection is
successful. The Bluetooth icon will stop blinking and remain illuminated.
If your Segway S-PLUS intermittently sounds an alarm, stop riding and check the App (if connected) for details.
Charging
Do not connect the charger if the charge port or charge cable is wet.